Xiangyin Anticorrosive Wood Design Factory

Xiangyin Anticorrosive Wood Design Factory

Ancient Chinese buildings often have exquisite wood carvings. The so-called carved beams and painted buildings and curved columns and Zhu threshold refer to this. Shanxi, Anhui, Jiangnan water towns and the wood carvings on buildings in Fujian and Guangdong are all very famous. The woodworkers in Shaoxing and Dongyang, Zhejiang Province were famous all over the world; Shanxi’s rich and wealthy, whose architectural luxury is unbelievable unless you have witnessed them; one of Huizhou’s "Three Carvings" (stone carving, brick carving and wood carving) is both solemn and lively ; And the wood carvings in Fujian and Guangdong are rich in color, and they have a different style. Ancient Chinese buildings are dominated by beam-pillar wooden structures, and the walls are generally not load-bearing. Therefore, lattice doors or lattice fans are generally installed between the pillars of the porch and the pillars instead of the wall surface. Most of them are six or eight, which is not only ventilation, lighting, decoration, but also Cut off from the outside world. In ancient times, the buildings were tall, so the grid fan was narrow and tall, slender and tall, like a slender lady. Therefore, people vividly call the ring plate in the middle of the grid fan as the waist plate and the skirt plate below the waist, which is quite anthropomorphic. The upper lattice center has two kinds of mullion and rhombus. The patterns are square, oblique grid eyes, 4d running water pattern, pin pattern, ho